Pergola awning model
Pergola
The Pergola awning model is a type of retractable awning/movable roof, which consists of aluminium elements and provides safety and durability. It was tested in extreme weather conditions. In addition to the standard Pergola model, we also offer a bioclimatic pergola, as well as the Smart roof model.
Roma Quadra terrace awning
Roma Quadra
The Roma Quadra terrace awning consists of two flat awnings attached to a self-supporting metal structure. The technical solution of the metal structure is designed for quick assembly and dismantling, which is very important for bars and restaurants (applies to all terrace awnings).
Barra Quadra flat awning model
Barra Quadra
The Barra Quadra is a flat awning model with folding arms under the fabric, with springs inside them, and are made to a maximum length of 350 cm. The width of this model can be large (up to 16 m) because the arms are not on the sides.
Barra Quadra Hermettico flat awning model
Barra Quadra Hermettico
The Barra Quadra Hermettico flat awning model has a cassette that in the retracted state of the awning stores not only the fabric, but arms as well. The maximum length of this model is 600 cm, with a projection of up to 350 cm.
Barra Quadra Maxi flat awning model
Barra Quadra Maxi
The Barra Quadra Maxi flat awning model is made of very large profiles and used for large projections. Projections can range from 400 cm to 600 cm, with maximum awning widths of up to 16m.
Barra Quadra Mini flat awning model
Barra Quadra Mini
The Barra Quadra Mini flat awning model is a model with folding arms under the fabric and springs inside them. Mounting brackets of this awning are also the arms carriers. The maximum width of the awning is 480 cm, with the maximum projection of 225 cm.
Barra Quadra Cassonetto flat awning model
Barra Quadra Cassonetto
The Barra Quadra Cassonetto flat awning model is a model with a weather strip which holds the fabric, and arms below the fabric that move the awning.
Standard flat awning model
Standard
The Standard flat awning model is designed for loggia-type patios with a ceiling and side walls. The lateral arms are made of aluminium, plastic coated in RAL 1013, with an inboard spring inside, so they always keep the fabric tight. The factory dimensions of the arms are: 100, 125 and 150 cm.
Eoly flat awning model
Eoly
The Eoly flat awning model is suitable for loggia-type patios or patios that have no side walls and have a ceiling. Aluminium arms, plastic coated in RAL 1013, 50 cm long and with a position controller, are designed for installation on a concrete or metal patio fence.
Verticale flat awning model
Verticale
The Verticale flat awning model is designed for vertical closure of patios and other open spaces. It can be combined with various elements as needed: with narrow aluminium side guide rails, wide metal guide rails or lateral guide wires.
Elite awning model
Elit
The Elite awning model is a type of retractable aluminium awning used for shading of horizontal surfaces.
Classic semicircular awning
Classic
The Classic semicircular awning has the same height to depth or projection ratio. Its aluminium structure is plastic coated in RAL 1013 (applies to all awnings). The fabric is optional: PVC or acrylic (applies to all semicircular awnings).
Cascade semicircular awning
Cascade
The Cascade semicircular awning features truncated lateral profiles, so that the height is shorter than the depth/projection. It is designed to be mounted at lower heights, but with the need for greater depth/projection.
Sphere arched semicircular awning
Sphere
The Sphere arched semicircular awning is designed to be mounted on circular façades. It is suitable for façade and soffit mounting (applies to all semicircular and flat awnings).
Roma Classic awning
Roma Classic
The Roma Classic terrace awning consists of two semicircular awnings attached to a self-supporting metal structure. The metal structure is made of pipes 100x100 mm in diameter, while the colour is at the option of the customer (applies to all terrace awnings).
Attika Pesante awning
Attika Pesante
The Attika Pesante awning is a terrace awning model where the retracting fabric slides over aluminium profiles, first horizontally, and then lowers vertically to the ground. There is also a possibility of making a system of two awnings with a supporting metal structure in the middle.
Fixed tunnels
Fixed tunnels
Fixed tunnels are made of plastic-coated aluminium profiles in various dimensions and shapes, with straight, spherical or ellipsoidal ends, and on a supporting metal structure. If several connected tunnels are being made, a rainwater channel system is also required.
Ellisse awning
Ellisse
The Ellisse awning of slightly arched shape has the same height to depth or projection ratio. It is retracted using a rope through PVC bearings equally distributed on both sides (applies to all semicircular awnings).
Prolunga awning
Prolunga
The Prolunga is a semicircular awning which, in addition, has a so-called "blind spot", so the height is much smaller than the depth/projection and it is fully retractable. It is designed to be mounted at lower heights, but with the need for much greater depth/projection.
Ribalta awning
Ribalta
The Ribalta awning model is a combination of the Verticale and Standard models, suitable for loggia-type patios and similar openings. The circular barrel onto which the fabric is wound is made of galvanized metal. Other structural elements are made of aluminium and plastic coated in RAL 1013.
Awning motorisation
Awning motorisation
We offer electric motors of the renowned producer SOMFY. In addition, we also offer the possibility of mounting accessories such as remote control, as well as complete solutions for wind and sun automation with sensors.
Fabric collections for outdoor sun protection
Fabric collections
We are the representatives of the Spanish-based company S.A.RECASENS, which is manufacturing the fabrics in our offer. Here you can find the collections of: acrylic fabric, PVC fabric, SCREEN material, Decorline fabric and Solrec fabric.